Some Of This Week's Welds !

 This series of photos is some sort of submerged science thing but who cares about the details of what it is as long as You get to weld it !!!

 This thing was an easy weld, MIG ran mostly down hill.

 This is another pipe assembly, note the flanges are stainless steel ...

These flanges had to be TIG welded in place to keep
the weld  small enough for a pipe to mate up.

The smaller stainless flange was MIG welded on the inside
than , using TIG was fusion welded on the pipe side !

 This next sequence of photos is a drive shaft repair , the sleeve had to be plug welded in adjacent spots than fillet welded all around both ends of the sleeve .

 this is a stainless railing that fought me the whole time - note the fixture that had to eventually be fabricated to keep the angle in place while welding .

This is an aluminum master cylinder that had to have a plug welded in place than ground
to hide the weld ..

Ok that's it for now 

HAPPY WELDING !!!!