New Torch Body -

    After a job interview this AM I got the call from the weld shop that my parts were in. I have been putting this post off until this happened so I could photo the different torch bodies and, easily show the difference between the two .

The larger of the two is the WP-9 torch body which uses 2 series collets, bodies and , lenses.

The smaller is the CK-80 RG torch body which can use the 2 series collet bodies and lenses however requires a torch specific collet to secure the tungsten in place.

Here are the links,

WP-9 Replacement Parts .

CK-80 RG Parts List.

Both of these torch bodies are gas cooled. 

The series 2 collet bodies pictured may be used on either torch body however the collets differ from one to the other, the series 2 are upper and the CK-80 are pictured lower, they do not look that different at a glance but there is just enough length (roughly 1/8") that the collet bodies will not work correctly without them. 

 The Gas Lens pictured on the CK-80 Torch (on the right lower) is specific to the torch and will not work with the WP-9 torch body (on the left lower). 

The upper collet is the series 2, the lower is the CK-80.

I have yet to need to use these torch bodies but the next time I get a job in the shop that requires getting into a tight space I will be better prepared.

Thank You for looking.

HAPPY WELDING !!!